icon-search
icon-search
  • smoke and heat detector tester.jpeg

Heat & Smoke 2 in 1 Detector Tester

NT$ 15,500.00
- +
icon-cart Add to Cart
Home

HEAT-SMOKE 2 IN 1 DETECTOR TESTER

※CAUSION※
※DO NOT STORE THE SMOKE DETECTOR TESTER UNDER HIGH TEMPERATURE ENVIRONMENT※
※RISK OF ELECTRIC SHOCK UNDER STORMY WEATHER AND EXPOSED WIRES ENVIRONMENT※
※RISK OF FIRE UNDER GALE ENVIRONMENT※

Functions:

Our Heat-Smoke 2 in 1 Tester is suitable with most detectors, air is heated by the heater within the cup rapidly. Smoke dispensed to simulate the sensing chamber rapidly by lightly pressing or pulling rope.

Transparent upper cup for easy observing detector LED while testing. Upgraded mistake-proofing body design to avoid smoke detector tester fall over and simplify detector tester installation. We also provide a pulling rope for testing smoke detectors located on dropped ceiling or similar light ceiling structures.

PC material has taken and passed the Temperature Environmental Test, and can avoid deformation by working under high temperature environment continuously.


Features:

-    Suitable for most detectors
-    Design for use at height and at angles
-    Transparent upper cup enable observing detector LED light during inspection

 For Smoke Testing:

  1. Upgraded mistake-proofing body design to avoid smoke detector tester fall over
  2. Capable with Japan and U.S. made smoke tester
  3. Screw thread bottle design for pressing strength/pressure adjustment
  4. Can install pulling rope for dropped ceiling or similar light ceiling structure (optional)

For Heat Testing:

  1. Plastic components using PC (Polycarbonate) shatterproof, high temperature and deformation resistant, suitable for usage in inspection activities.
  2. Special quick locked design avoids heater movement and easy set up.
  3. Heater activate/ inactivate rapidly
  4. Heated up air indirectly, will not damage the detector.
  5. Heat convection design on upper cup increase temperature rapidly
  6. Capable with Nohmi/Panasonic heater

Standard Equipment

1.  Heat-Smoke 2 in 1 Detector Tester * 1

2.  Heater * 1

3.  Heater Cover * 1

4.  Instruction manual *1

5.  Smoke detector tester holding rubber band *1 (for US canned smoke)

6.  All-Purpose Adapter for Extension Poles *1


Specification

Heat-Smoke 2 in 1 Detector Tester - Model CC06V3

Material: Stainless Steel, Polycarbonate, ABS (Acrylonitrile Butadiene Styrene)

Transparent PC Cup: Inner Dia.89±1mm, outer Dia.94±1 mm, thickness 2.6±1mm

Total Height: 204~265.1±1 mm

Weight: approx. 647g±1

Oil Cup Volume: 40cc ±1 (2hours usage)

Fuel: Cleaning Naphtha

Maximum Temp.: approx. 240℃

All-Purpose Adapter for Extension Poles: 49g


ADDITIONAL INFORMATION

  1. This product is highly electrical conductive

  2. Excessive fuel (cleaning naphtha) might lead to fire during usage, kindly remove excess fuel by upside down the fuel cup.

  3. Make sure the fuel cup is plugged-in properly. Improper placement might lead to fuel cup fall off.

  4. Make sure the gas ejection pipe on the oil cup has been installed properly.
    Improper placement might lead to pipe deformation or damage.

  5. Do not place or store fuel and lighter under high temperature environments and in vehicles.

  6. Do not pour liquid , rub and touch the heaters’ fabric surface.
    Improper usage of Heater might lead to invalidation. 

  7. Avoid using the Detector Testing Tool in wires exposed environment and under stormy weather.

  8. Avoid using the Detector Testing Tool under windy or gale environments.

  9. Please equip with workplace safety equipment or personal protective equipment (e.g. Safety Helmet)when using this product.

  10. Improper used ,human factors (e.g. improper storage, trample) and force majeure factors is not covered in warranty.

APPLICATION

For Smoke Testing only:
Before Inspection:

  1. Screw out the lower cup (Grey color)

  2. Place the smoke detector tester to the lower cup and screw in.

  3. Adjust the pressure for the smoke detector tester, it should spray out smoke easily by slightly pressing.

  4. Make sure the gas ejection pipe on the oil cup has been placed properly.

  5. Plug-in the Detector Testing Device to the extension pole.

  6. Start Inspection.


After Inspection:

  1. Screw out the lower cup.


For Heat Testing only:

Before Inspection:

  1. Add 40cc fuel to the oil cup, remove excess fuel.

  2. Plug-in the fuel cup

  3. Make sure the gas ejection pipe on the oil cup has been placed properly.

  4. Make sure the heater is inserted.

  5. Push the moveable cover plate to "OPEN"

  6. Ignite the heater.

  7. There will be no flame occurred and the heaters' fabric should be combusted when ignited successfully.

  8. Air will be heated up rapidly within the cup.

  9. Plug-in the Detector Testing Device to the extension pole.

  10. Start Inspection.

After Inspection:

  1. Put the heater cover on the Heater for at least 1 minute.

  2. Heaters’ fabric should be in non-combustion status.
    If the heaters' fabric is still combusting, kindly unplug the oil cup.


For Heat & Smoke Testing:

Before Inspection:

  1. Follow with the procedure of "Heat testing" #1 ~ #8

  2. Confirmed the heater is properly heated up with no flame occured.

  3. Follow with the procedure of "Smoke testing" #1~4

  4. Plug-in the Detector Testing Device to the extension pole.

  5. Start Inspection.

After Inspection:

  1. Screw out the lower cup.

  2. Put the heater cover on the Heater for at least 1 minute. 

  3. Heaters’ fabric should be in non-combustion status.
    If the heaters' fabric is still combusting, kindly unplug the oil cup.

     

TROUBLESHOOTING

Heated up Temperature too low.

  1. Movable cover plate has not push to the "OPEN" line properly.

  2. Not enough fuel.

  3. Oil cup cannot fixed to the tenon.
    This situation usually occurs when the oil cup is used to refill fuel frequently, please press the oil cup and shape it to fixed to the tenon.

  4. Oil cup cotton volume is too small to reach the bottom of the heater;
    Oil cup cotton is carbonized due to frequent usage.
    Kindly tear the carbonized part or change/fill up the cotton.

  5. The Heater absorbs the smoke testers' smoke.

    Please burn the heater by its bottom until no more smoke occurs.
    If it is still not working, it should be at the end of the lifespan, please replace it with a new heater.


Smoke Detector Tester spray out smoke continuously 

  1. The lower cup screws too much, pressure is too high for the smoke detector tester.Kindly screw out the lower cup.

  2. Device's Holder is deformed, kindly uninstall the holder and shape it back. (Reminded not to screw the holders' screw too tight.)

  3. Oil cup was not fixed to the tenon.
    Please press the oil cup and shape it to be fixed to the tenon.

  4. The gas ejector pipe on the oil cup has not been installed properly.

Before you pay !

How we complete an order:

  1. You place the order on our website.
  2. We inquire about the freight and add it to the order.
  3. We'll inform you of the price adjustment.
  4. You can check the price and pay the order on email & our website.
  5. We will arrange the delivery very soon!


Notice:

  1. You will have to pay VAT & Tariff while goods are imported into your country.
  2. When the shipment charge shows up NTD0, please place the order first. We’ll contact you in two working days by email after inquiring about the freight and delivery days. Thank you!

This year all the world is having a different situation about the service of Cross-border logistics. To make sure we are having a fair deal including freight, we will inquire about the freight with the logistics company and confirm with you before you pay.


First time doing export.

We are a Taiwanese company founded in 1996.

Doing fire inspection for 11 years.

Devoted to the invention of fire inspection tools from 2013.

And now we are exporting our products for the first time.

We are still learning how to provide better service for our customers abroad.

If you have any advice,  please feel free to tell us anytime !




Your Cart

Your cart is currently empty.

Continue browsing here.