Place a testing order here.
暫存比較表：
| CCFireTester CC03 | Solo 200 | |
|---|---|---|
| Price(USD) | $289 | $571 *Price fluctuate, its the lowest price we found. |
| Weight | about 540g light, easy to carry | about 1450g |
| Aiming Veiw | won't be blocked | will be blocked |
| Working Principle | grabs tighter no matter twisting clockwise or counterclockwise, won't lift up light ceiling boards | push up the tool till there's enough friction to remove |
| Be used on T-bar ceiling | v | x |
| Grabbing Range | universal, 44~170mm, available for factory light bulbs | universal, 65~110mm |
| Fall-Resistant | v | x |
| +認證那一段 |
| CCFireTester CC06 | Solo330 | Solo332 | Solo 365 | |
|---|---|---|---|---|
| Price(USD) | $350 | $409.84 *Price fluctuate, its the lowest price we found. | $409.84 *Price fluctuate, its the lowest price we found. | $1112 *Price fluctuate, its the lowest price we found. |
| Material of Smoke | Aerosol Spray American made, Solo, Japan made CCFiretester 250ml & 150ml | smoke catridge: Solo ES3 | ||
| Available testing times | depends on tester spray | 60~120 | ||
| Pulling String | v Available to test detectors on T-bar ceilings | x | no need Available to test detectors on T-bar ceilings | |
| Smoke Clearing | Available with CCFireTester Auto Smoke Clearing Fan | same with CCFireTester | V | |
| Clearing Efficiency | Clear out smoke right away after testing | same with CCFireTester | Take off for standby mode then wait for 2 sec and put it back for blowing out. | |
| Get Ready | Put the aerosol in. | Put the aerosol in. | 1. Install battery & smoke catridge. 2. Spray and blow out smoke in sequence | |
| Material | Silicone, Stailess Steel, ABS won't break down easily | Plastic | Plastic with electric & software module, might require update | |
| Height & Weight | 126-181mm, 467g, Small volume & Lighter for carrying | 250-300mm, 610g | 770g (without catridge and battery) 907g (with catridge and battery) 350mm | |
| Width of testing cup (mm) | 105 | 101 | 177 | 143 |
| Storage temp. of the aerosol | lower than 40°C | lower than 50°C | lower than 100°C | |
| Certification | x auxiliary tool, container for aerosol spray, avalible for listed canned smoke | UL listed | UL listed | |
| CCFireTester CC09 | Testifire 1000 | ||
|---|---|---|---|
| Tester Basic Info. | Price(USD) | $350 | $1112 *Price fluctuate, its the lowest price we found. |
| Material of Smoke | Canned Smoke | Smoke Capsule | |
| Weight | 573g | 1140g | |
| Available angle | free angle | specific angle | |
| Structure & Maintenance | simple mechanic structure, no need to matainence | electric & software module, might require update | |
| Material & Durability | standless steel & ABS material, simple mechanic structure, heat-resisting, drop proof | electric module and plastic | |
| Width of testing cup(mm) | 89 | 125 | |
| Get Ready | 1. add oil & light up the heater. 2. put the aerosal spray in. | 1. install battery & smoke catridge. 2. set up testing sequence. | |
| Using | No limit in testing sequence. Press for smoke spraying or Get close to heat up the detector. | Spray smoke and heat up in set sequence. | |
| Smoke Testing | Adjustable Tester Spray | Japan made, Solo, CCFiretester 250ml & 150ml | specific smoke catridge |
| Available to test | 1000 detectors (with CCFireTester Canned Smoke) | ? | |
| Smoke Clearing | Available with CCFireTester Auto Smoke Clearing Fan | with clearing mode | |
| Clearing Efficiency | Clear out smoke right away after testing | Take off for standby mode then wait for 2 sec and put it back for blowing out. | |
| Storage temp. of the aerosol | lower than 40°C | lower than 100°C | |
| Heat Testing | durability/endurance of heater | 4360 hours | ? |
| output temperature | 340°C(290°C in 22 sec) | 100°C | |
| Material of heat | Flame Retardant Fabric Heater | Battery batons, needs to be charged before testing | |
| record number of tested detectors | X | v | |
| certification | X | UL listed | |
| potential danger | may burn up if added too much fule | safer, but heat up slower | |
| conductivity | conductive | Non-conductive | |
| other function | Upgrade with clearing mode with Auto Smoke Clearing Fan |
| CCFireTester | Solo460/461 | Solo424/423 | |
|---|---|---|---|
| Price(USD) | $350 | $1015.85 *Price fluctuate, its the lowest price we found. | $949.85 *Price fluctuate, its the lowest price we found. |
| Type | cordless | cordless | grid |
| Weight | 336g, light and easy carrying | 1100g | 1870g |
| Material | stainless steel, with well durablity | plastic | plastic |
| Output Temp. | 340°C(290°C in 22 sec) | 90°C | 90°C |
| Material of heat | Flame Retardant Fabric start testing at anytime with no burning fire | Battery needs to be charged before use | Power Cable |
| Available Angle | free angle | specific angle | free angle |
| Get Ready | Add oil & Light up heater | Install battery & Turn on | Plug in & Turn on |
| certification | x | v | v |
| potential danger | May burn up if added too much fuel | ? | ? |
| conductivity | conductive | non-conductive | non-conductive |
| CCFireTester | Solo | |
|---|---|---|
| Price - Pole (USD) | $247 | $860 *Price fluctuate, its the lowest price we found. |
| Price - Tool (USD) | $289 | $571 *Price fluctuate, its the lowest price we found. |
| Price - Total (USD) | $536 | $1431 *Price fluctuate, its the lowest price we found. |
| Reachable Height (M) | 7.9 | 6 |
| Weight of Pole+Tool | (CCFireTester Pole+Tool) 2.28+0.54=2.82 | (Solo100+200) 1.85=1.1=2.95 |
| Available to adjust any length/height | v | x |
| Max Extended Length | 640 | 450 |
| Length | 120 | ? |
| Maetrial | aluminum alloy | glass fiber |
| Drop Resistance | v | x |
| Conductivity | conductive, insulated at lower part and bottom | non-conductive |
| Set 1 Grab Detector | Set 2 Grab Factory Light Bulb | Set 3 Grab Detector + Factory Light Bulb | |
| Detector Removal Tool | 1 | 1 | 1 |
| Short Leg | 1 | X | 3 |
| Long Leg | X | 3 | 3 |
| Self-Adhesive Magnet | 3 | 3 | 3 |
| Grab extension parts | X | 3 | 3 |
| Self-Adhesive Magnet with cotton pad | 2 | 2 | 2 |
| Safety net | X | 2 | 2 |
| Nylon wash bag | 1 | 1 | 1 |
| All-Purpose Adapter for Extension Poles (with Hose Clamp) | 1 | 1 | 1 |
| Instruction manual | 1 | 1 | 1 |
| Set 1 Grab Detector | Set 2 Grab Factory Light Bulb | Set 3 Grab Detector + Factory Light Bulb | |
| Detector Removal Tool | 1 | 1 | 1 |
| Short Leg | 1 | X | 3 |
| Long Leg | X | 3 | 3 |
| Self-Adhesive Magnet | 3 | 3 | 3 |
| Grab extension parts | X | 3 | 3 |
| Self-Adhesive Magnet with cotton pad | 2 | 2 | 2 |
| Safety net | X | 2 | 2 |
| Nylon wash bag | 1 | 1 | 1 |
| All-Purpose Adapter for Extension Poles (with Hose Clamp) | 1 | 1 | 1 |
| Instruction manual | 1 | 1 | 1 |
Quotation & Inquiry
Due to high order volume, inquiry responses are temporarily paused. We prioritize processing paid orders through our website. Please use our checkout system for pricing estimates. For addresses outside the coverage area, kindly email us. Thank you!
Addional information：
- Manufacturer name：CHANGCHI SECURITY EQUIPMENT CO. LTD.
- Brand name：CCFireTester.
- Lead time：about 10-13 working days after payment confirmed, excluding customs processing time.
- Country of origin：all of our products are made in Taiwan.
- Data sheet：we describe out product detailedly on our website, you can directly print the product page as the data sheet.
- Certification：our products are currently uncertified.
- We sending products from：No.11, Lane 227, Ren-Ai Rd., West Dist., Chia-Yi City , Zip 60055, Taiwan
- Warranty：Products are out of warranty when sold overseas.