• Auto smoke clearing fan.jpeg

Auto Smoke Clearing Fan (for detector testing)

NT$ 90.00
- +
icon-cart Add to Cart

Auto Smoke Clearing Fan (for detector testing)




Our Auto Smoke Clearing Fan is suitable for different brand’s Smoke Detector Tester. After Fan turns on, it will operate automatically when getting close to the detector. Avoid false alarm by clear up smoke residue within the detector sensing chamber easily after testing.


-            Automatically blows out smoke after sensor detection.

-            Fully Charge battery for approximate 2000 detectors or 3 hours usage.

-            Capable with the majority of  Smoke Detector Testing Device.


Standard Equipment

  1. Packing Box (Plastic) * 1

  2. Auto Smoke Clearing Fan *1

  3. USB Charger Cable *1

  4. Anti-dropping Chain Lanyard * 1



Auto Smoke Clearing Fan - Model CC07V2

Outer Shell Material: Stainless Steel

Voltage & Current: DC 9V / 0.25A

Size: 88L x 66W x 46thk mm

Weight: 214g (Included battery)

Wind Speed: 10m/s

Sensing Distance: 0 ~ 10 cm

Ventilator Charger: 

Suitable for rechargeable PP3 Battery

Input: 110V~240V / 50-60Hz

Output: 8.4V/1A

Weight: 75g

Packing Box Size: 95L x 75W x 28thk mm

Charger Cable Length: 93cm

Fan Battery: (Not included in product)

Battery: Rechargeable PP3 Battery

Recommend Model: GN-9V

Current/Capacity: 140mA / 700mAh

Weight: 32g

Packing Box Size: 95L x 75W x 28thk mm

Charger Cable Length: 93cm


For Battery

  1. Unscrew the battery cover at the back, beware of ripped away wire on the cover.

  2. Insert new battery into the battery compartment.

  3. Screw the battery cover, ready for usage.

For Inspection preparation 

  1. Confirm the fan is fully charged or already insert new battery into the battery compartment.

  2. Complete all Detector Tester's inspection preparation.

  3. Hanged the Fan holder(on the back) on the Detector Tester's holder screw.
    If there is no screw/component for hanging, kindly fasten the fan to the detector tester holder by cable tie.

  4. Fasten the Chain Lanyard at the Fan holder properly to avoid fall off.

  5. Double-check if the Detector Tester's smoke testing function has been affected.
    If yes, kindly adjust the detector tester holder screw tightness.

  6. Turn on the switch of the Auto Smoke Clearing Fan.

  7. Start Inspection.



General Information

  1. This product is highly electrically conductive.

  2. Beware of ripped away wire when opening the battery cover.

  3. Make sure the Chain Lanyard is fastened properly. Improper handling might lead to instrument fall off.

  4. Please be sure using Genuine Charger(voltage regulated function) for battery charging to ensure battery voltage tolerance and safety.

  5. Improper handling and operation can lead to leakage of battery substances and products decomposition.

  6. Please equip with workplace safety equipment or personal protective equipment (e.g. Safety Helmet)when using this product.

Battery Information

  1. Only capable with rechargeable PP3 batteries.

  2. Recommended rechargeable battery model GN-9V.

  3. Battery usage period might be different if using another battery model.

  4. Recommended Initial charging time for 3 hours. Next charging time can be reduced to 1.5 hours.

  5. Please turn off the instrument when charging the battery. 

  6. Please recharge the battery for 1 hour every 3 months to extend the battery life.

  7. Fully Charge battery for approximate 3 hours usage. Operating time might decrease based on the battery life and battery model.

  8. To avoid reducing Battery lifespan, make sure the instrument is stored under room temperature(>40°C), dry place and away from fire. 

  9. Any physical contact or inhalation of battery leakage substance should be avoided.
    If there is any contact with the battery leakage substance, flush the contact position(s) immediately with water and seek medical attention as soon as possible.

Before you pay !

How we complete an order:

  1. You place the order on our website.
  2. We inquire about the freight and add it to the order.
  3. We'll inform you of the price adjustment.
  4. You can check the price and pay the order on email & our website.
  5. We will arrange the delivery very soon!


  1. You will have to pay VAT & Tariff while goods are imported into your country.
  2. When the shipment charge shows up NTD0, please place the order first. We’ll contact you in two working days by email after inquiring about the freight and delivery days. Thank you!

This year all the world is having a different situation about the service of Cross-border logistics. To make sure we are having a fair deal including freight, we will inquire about the freight with the logistics company and confirm with you before you pay.

First time doing export.

We are a Taiwanese company founded in 1996.

Doing fire inspection for 11 years.

Devoted to the invention of fire inspection tools from 2013.

And now we are exporting our products for the first time.

We are still learning how to provide better service for our customers abroad.

If you have any advice,  please feel free to tell us anytime !

Your Cart

Your cart is currently empty.

Continue browsing here.